Skip to main content
Send an Inquiry 中文

Web checklist

Flat Wire Drawing Checklist

Define the width, thickness, corners and material condition, then add bending, insulation, joining and spool requirements for the intended part.

Start with your drawing or these five inputs

Send the current drawing with its revision, or outline the material, geometry and application below. The complete specification checklist remains available for the next technical review.

Material
Copper, aluminum or specified clad conductor; grade, temper and layer basis where relevant
Bare section
Width, thickness, corner radius, tolerances, camber and twist
Finished envelope
Insulation build and finished width/thickness if needed
Winding or formed part
Available space, bend direction/radius, winding tension and drawing
Quantity and format
Length/mass, spool/coil or cut length, destination
Send the drawing or initial brief
Width + toleranceBare conductor: material and conditionDashed line: finished insulation envelope, if specifiedCorner RThickness + tolerance
Drawing details. Specify separate bare and finished dimensions, corner radius, edge condition and bend direction on the actual drawing.
Complete specification criteria
SpecificationSelection criteria
MaterialCopper, aluminum or specified clad conductor; grade, temper and layer basis where relevant
Bare sectionWidth, thickness, corner radius, tolerances, camber and twist
Finished envelopeInsulation build and finished width/thickness if needed
Winding or formed partAvailable space, bend direction/radius, winding tension and drawing
Electrical and joint requirementsResistance, temperature-rise target and terminal/joining process
Trial checksForming, corner/insulation damage, resistance and completed-part tests
Quantity and formatLength/mass, spool/coil or cut length, destination
Sample planningLaboratory sample, process trial and production quantities; acceptance criteria, schedule and delivery destination.
Specification and inspectionSpecification revision, inspection records and agreed deviations.
Delivery and lot recordSpool/coil interface, core/OD/net weight, continuous length, joints/splices and marking, package/lot identity and required shipping records.
Flat Wire Drawing Checklist: project worksheet — open worksheet

Record your project requirements and observations, then download or include them in an inquiry.

ItemInformation / unitsYour input
MaterialCopper, aluminum or specified clad conductor; grade, temper and layer basis where relevant
Bare sectionWidth, thickness, corner radius, tolerances, camber and twist
Finished envelopeInsulation build and finished width/thickness if needed
Winding or formed partAvailable space, bend direction/radius, winding tension and drawing
Electrical and joint requirementsResistance, temperature-rise target and terminal/joining process
Trial checksForming, corner/insulation damage, resistance and completed-part tests
Quantity and formatLength/mass, spool/coil or cut length, destination
Sample planningLaboratory sample, process trial and production quantities; acceptance criteria, schedule and delivery destination.
Specification and inspectionSpecification revision, inspection records and agreed deviations.
Delivery and lot recordSpool/coil interface, core/OD/net weight, continuous length, joints/splices and marking, package/lot identity and required shipping records.
Other formats and preview
Save or restore a draft

Drafts stay in this browser. Clear inputs also removes the saved draft.

Worksheet version: RT-RFQ-WORKSHEET-1.

Product and test information

Send a flat-wire drawing
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp