01
Controlled Process
Quality records are organized across incoming material, cladding, rolling, annealing, slitting and packaging for PV ribbon, CCA, CCS and NCC products.
Quality System, Compliance Documents and Applicable Standards
Certification, inspection and traceability systems for PV ribbon and clad conductor manufacturing
Quality System
Quality Evidence for PV Ribbon and Clad Conductors
This page connects certifications with the practical controls buyers and engineers need: specification review, production validation, batch traceability and export documentation.
02
Batch Validation
Critical dimensions, electrical performance, mechanical properties, surface condition and composition are checked against project specifications.
03
Delivery Documents
Certificate copies, inspection records, COA/COC and compliance documents can be prepared according to customer and application requirements.
Company Management System
The available certificate copy identifies its named holder and scope. Current registry status and applicability to the supplying entity remain to be confirmed. Product conformity requires specifications, test reports and customer qualification.
ISO 9001:2015
ISO 9001:2015
The certificate copy names Raytron New Energy (Zhejiang) Co., Ltd. as its holder, certificate 01526Q50145R101, effective January 14, 2026 and valid until September 25, 2028. It covers design, development and manufacturing of non-ferrous metal wires, strips and foils (copper-based and aluminium-based clad composite materials). Confirm current status and applicability to your supplying entity before ordering. This management-system document does not certify every product or end-use.
Product Compliance Documents
Compliance documentation is prepared against the agreed purchase specification for applicable products, materials and production batches. Document scope is confirmed per order.
RoHS and REACH Documentation
State the applicable product, market and document requirements. The scope and availability of RoHS or REACH documentation must be confirmed for the order.
Request DocumentationCOA / COC
Certificates of analysis or conformity are included when specified in the purchase specification. Scope and content are agreed per order.
Request DocumentationApplicable Material Standards and Contexts
The standards below describe applicability and boundaries only — they are not certifications held by Raytron. Conformity of a specific product is established by the purchase specification and test reports.
ASTM B566
Standard Specification for Copper-Clad Aluminum Wire
ASTM B566 may apply to specified bare round CCA wire products. Final applicability depends on wire class, diameter, temper and purchase specification. CCA flat wire, strip, foil and ribbon require their own agreed specifications and test methods.
Standard SourceIEC 60228
Conductors of Insulated Cables
IEC 60228 may be relevant to the final cable conductor design. Final compliance is determined at the insulated cable or cord level.
Standard SourceUL 758
Appliance Wiring Material
UL 758 is relevant to qualified Appliance Wiring Material constructions. End-product certification must be confirmed by the cable manufacturer and applicable UL style.
Standard SourceASTM B355
Nickel-Coated Soft or Annealed Copper Wire
ASTM B355 applies to nickel-coated soft or annealed round copper wire and should not be used as a universal NCC cladding standard.
Standard SourceCustomer Project Deliverables
Availability of the documents below must be confirmed before order acceptance. Raytron documentation does not certify the customer’s final product.
FAI
Control Plan
Inspection Report
Sample Qualification Data
PPAP-related Documentation
External End-Product Qualification
The qualifications below remain external or customer-controlled unless Raytron holds a directly applicable certificate. They are not listed as certifications held. If your project involves these requirements, state them in your RFQ so we can assess feasible support.
External or customer-controlled qualification, not held by Raytron: UL External or customer-controlled qualification, not held by Raytron: IATF supply-chain approval External or customer-controlled qualification, not held by Raytron: AS9100-related qualification External or customer-controlled qualification, not held by Raytron: DO-160 External or customer-controlled qualification, not held by Raytron: CAAC External or customer-controlled qualification, not held by Raytron: AEC-Q200 External or customer-controlled qualification, not held by Raytron: Medical or implantable qualification
Certificate Scans
Click to view full-size certificate scans. For official copies, please contact us.
Quality Process
Incoming Inspection
Raw material verification before cladding, rolling, annealing and slitting
Process Control
In-process control for dimensions, surface condition, bonding and production parameters
Final Testing
Finished product testing against customer specifications before shipment
Traceability
Batch traceability from raw materials and process records to delivery documents
Testing Capabilities
Inspection scope, sampling frequency and report content are defined by product control plan, purchase specification and customer agreement.
Composition Analysis
Mechanical Testing
Electrical Testing
Dimensional Inspection