Specification Checklist
Conductor Weight Comparison Checklist
State whether the designs have equal geometry or equal resistance before comparing mass. Collect the material construction, dimensions and purchased quantity for each candidate.
Download Checklist (CSV)Specification worksheet · RT-RFQ-WORKSHEET-1 · Reference fields, not measured lot data.
Conductor Weight Comparison Checklist: project record — open worksheet
Record your project requirements and observations, then download or include them in an inquiry.
| Item | Information / units | Your input |
|---|---|---|
| Equal geometry | Length and metal cross-section · Core/layers, density source, measured or calculated mass | |
| Equal DC resistance | Length, resistance target and reference temperature · Resistivity, required section, dimensions and mass | |
| Finished assembly | Electrical/mechanical duty and available space · Insulation, joints, packing and complete conductor quantity | |
| Purchase cost | Currency, price date and quantity basis · Supplier price, material mass, yield and processing costs |
Other formats and preview
Save or restore a draft
Drafts stay in this browser. Clear inputs also removes the saved draft.
Worksheet version: RT-RFQ-WORKSHEET-1.
Fields to Specify
Scroll horizontally to view all columns.
| Comparison basis | Keep fixed | Record for each candidate |
|---|---|---|
| Equal geometry | Length and metal cross-section | Core/layers, density source, measured or calculated mass |
| Equal DC resistance | Length, resistance target and reference temperature | Resistivity, required section, dimensions and mass |
| Finished assembly | Electrical/mechanical duty and available space | Insulation, joints, packing and complete conductor quantity |
| Purchase cost | Currency, price date and quantity basis | Supplier price, material mass, yield and processing costs |
How to Use This Checklist
- Choose equal geometry, equal DC resistance or the same assembly duty before comparing the designs. Identify the density source and actual metallic section of each candidate.
- Mass (kg) = density (kg/m³) × metallic area (m²) × finished length (m). For a round wire use its metallic diameter; for flat or layered products use the actual section including the defined corners and layers.
- Purchased mass = finished mass ÷ material yield (as a fraction). Compare dated quotations and the same accepted output; account for scrap recovery, recurring processing and one-time conversion separately.
- These are calculation and procurement inputs. Use the existing models linked above for their stated conditions; no measured lot performance or unconditional saving is inferred.