Specification Checklist
CCA Conductivity and Resistance Specification Checklist
Define material identity, copper-content basis, geometry and the electrical measurements required for a CCA order. This checklist describes specification fields, rather than measured values for a catalogue of grades.
Download Checklist (CSV)Specification worksheet · RT-RFQ-WORKSHEET-1 · Reference fields, not measured lot data.
CCA Conductivity and Resistance Specification Checklist: project record — open worksheet
Record your project requirements and observations, then download or include them in an inquiry.
| Item | Information / units | Your input |
|---|---|---|
| Material identity | Core grade, mechanical condition and finished form · Grade / condition / drawing revision | |
| Copper proportion | Copper content or measured layers · Mass %, volume %, or each layer thickness; identify the basis | |
| Conductivity | Required value and measured sample or lot value · %IACS with temperature and test method | |
| Resistivity | Material result if required by the specification · Ω·mm²/m or stated equivalent; temperature and method | |
| Conductor resistance | Measured finished-conductor result · Resistance per stated length at stated temperature | |
| Record identity | Sample/lot, geometry, method and acceptance limit · Link each result to the actual conductor |
Other formats and preview
Save or restore a draft
Drafts stay in this browser. Clear inputs also removes the saved draft.
Worksheet version: RT-RFQ-WORKSHEET-1.
Fields to Specify
Scroll horizontally to view all columns.
| Field | Required information | Unit or basis |
|---|---|---|
| Material identity | Core grade, mechanical condition and finished form | Grade / condition / drawing revision |
| Copper proportion | Copper content or measured layers | Mass %, volume %, or each layer thickness; identify the basis |
| Conductivity | Required value and measured sample or lot value | %IACS with temperature and test method |
| Resistivity | Material result if required by the specification | Ω·mm²/m or stated equivalent; temperature and method |
| Conductor resistance | Measured finished-conductor result | Resistance per stated length at stated temperature |
| Record identity | Sample/lot, geometry, method and acceptance limit | Link each result to the actual conductor |
How to Use This Checklist
- Start with the construction and reference temperature, then state the required conductivity or resistivity separately from the finished-conductor resistance.
- For each reported result, retain the sample or lot, test method, units and acceptance limit. Copper fraction and conductivity are different quantities.