Skip to main content
Send an Inquiry 中文

Composite PV Ribbon: Module Application Record

Raytron copper-aluminum composite ribbon has been used in modules totaling more than 50 GW, including BC and TOPCon designs, according to Raytron application records as of November 2026.

Download the application record · PDF ↓
PV interconnect ribbon on the cell surface

Cumulative module application

Raytron copper-aluminum composite ribbon has been used in modules totaling more than 50 GW, including BC and TOPCon designs, according to Raytron application records as of November 2026.

The figure represents the combined nominal capacity of modules using the composite ribbon. Source: Raytron project and application records, November 2026.

Read the cited source and context in the buyer’s guide →

Ribbon application and record

Round and flat PV ribbon cross-sections
Round and flat PV ribbon cross-sections
PV module application record (PDF)
PV module application record (PDF)

TOPCon application comparison

In a 650 W-class TOPCon application, the 0.24 mm CCA-ribbon design was 3 W below the 0.24 mm copper-ribbon reference. The guide uses 650 W / 647 W to normalize the comparison.

For this round-ribbon substitution route, disable or bypass the existing local flattening operation. Compare joint quality, EL and module output using the revised stringing recipe and matching cell layout.

Review the stringing trial procedure →

Purchasing cost for the replaced ribbon

In some Chinese module-customer projects, purchasing cost for the replaced ribbon was more than 50% lower than the previous copper-ribbon solution. The percentage covers that ribbon purchase only.

Review the purchasing comparison →
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp