Skip to main content
Send an Inquiry 中文

PV Ribbon

SMBB Ribbon for High-Efficiency Solar Modules

Drawing-defined material, ribbon construction
Drawing-defined material; ribbon.

SMBB ribbon for multi-busbar and super multi-busbar solar modules requiring thin, consistent and low-stress ribbon.

Local SMBB schematic with round ribbons, contact pads and fine fingers; visible wires are a cropped sample.
SMBB local structure: round ribbons, contact pads and fine fingers. View full-size illustration
On this page

Construction and specification

Scroll horizontally to read all columns.

ItemSpecification
Material constructionConductor construction and solder coating specified for the ribbon position and cell process
Product formRibbon
Surface coatingTin, low-temperature solder, black or reflective coating
Supply formatSpool, traverse wound spool or cut-to-length

Control wire positioning across the cell

MBB and SMBB describe metallization or interconnection approaches. Round-wire dimensions, positioning, tension and joint consistency are the relevant starting inputs.

Compare breaks, displacement, optical shading and electrical loss in the intended module. Keep bare diameter, finished solder-coated diameter and coating composition separate in the trial specification.

PV technology and line-trial guide

Specification design factors

Drawing-defined specification

Geometry and performance

  • Width, thickness and edge geometry define a narrow flat conductor.
  • Metal layers and solder or insulation coatings perform different functions.
  • Spool format, winding tension and joining behavior connect the material to the assembly process.

Material and form references

PV ribbon specifications separate the metallic conductor section from the solder coating. Cell layout, wire positioning, joining and module tests describe the intended interconnection.

Standards and product forms

Product questions

What is SMBB ribbon?

SMBB ribbon is a solar module interconnection material used to collect and transfer current between solar cells or cell strings. Raytron supplies custom ribbon dimensions, coating systems and packaging formats for different PV module technologies.

How do I choose SMBB ribbon?

Start with the cell technology and soldering temperature. Then check coating type, shading loss, yield strength, module reliability requirements and compatibility with the automated process.

Which drawing details are needed for SMBB Ribbon for High-Efficiency Solar Modules?

Width, thickness and tolerances. Edge condition, burr, surface and roll dimensions. Metal grade and temper. Coating alloy and thickness, soldering conditions, cell layout and spool format. Quantity, spool or coil format, packaging and delivery destination.

How does a flat section behave in bending and winding?

Width, thickness and corner geometry define the conductor envelope. Bending about the long and short edges produces different strains and springback. Bare metal and insulated finished dimensions occupy different portions of the available winding space.

Related products

Prepare your inquiry

  • Width, thickness and tolerances
  • Edge condition, burr, surface and roll dimensions
  • Metal grade and temper
  • Coating alloy and thickness, soldering conditions, cell layout and spool format
  • Quantity, spool or coil format, packaging and delivery destination
Send Your SMBB Ribbon Requirements
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp