PV Ribbon
Low-Temperature PV Ribbon
View specificationsRequest a quote
Low-temperature PV ribbon uses a solder coating selected for a lower-temperature cell-interconnection process. Match the coating alloy and thickness to the cell, soldering window and stringer, then check joint strength and reliability in the module design.
On this page
Construction and specification
Scroll horizontally to read all columns.
| Item | Specification |
|---|---|
| Material construction | Copper-aluminum composite or specified copper base with the coating defined by the cell process |
| Product form | Ribbon |
| Surface coating | Tin, low-temperature solder, black or reflective coating |
| Supply format | Spool, traverse wound spool or cut-to-length |
Specification design factors
Drawing-defined specification
Geometry and performance
- Width, thickness and edge geometry define a narrow flat conductor.
- Metal layers and solder or insulation coatings perform different functions.
- Spool format, winding tension and joining behavior connect the material to the assembly process.
Selection and processing
Low-temperature describes the selected soldering process, not a universal temperature limit. Specify the coating alloy, its required melting behavior and the actual stringer window. HJT or another cell name alone does not set ribbon dimensions or soldering conditions.
Material and form references
Rolled strip, foil and flat wire are defined by material, temper, section and finished-part requirements. Their geometry and test methods differ from those of round wire.
Standards and product formsProduct questions
What is low-temperature ribbon?
low-temperature ribbon is a solar module interconnection material used to collect and transfer current between solar cells or cell strings. Raytron supplies custom ribbon dimensions, coating systems and packaging formats for different PV module technologies.
How do I choose low-temperature ribbon?
Start with the cell technology and soldering temperature. Then check coating type, shading loss, yield strength, module reliability requirements and compatibility with the automated process.
Can Raytron customize low-temperature ribbon?
Yes. Width, thickness, coating, temper, spool format and packaging can be customized according to drawing, sample or module process requirements.
How does a flat section behave in bending and winding?
Width, thickness and corner geometry define the conductor envelope. Bending about the long and short edges produces different strains and springback. Bare metal and insulated finished dimensions occupy different portions of the available winding space.
Related products
Prepare your inquiry
- Width, thickness and tolerances
- Edge condition, burr, surface and roll dimensions
- Core and outer-layer metals, each layer or ratio, and mass or volume basis
- Coating alloy and thickness, soldering conditions, cell layout and spool format
- Quantity, spool or coil format, packaging and delivery destination