Skip to main content
Send an Inquiry 中文

PV Ribbon

BC Ribbon for Back Contact Solar Cells

Drawing-defined material, ribbon construction
Drawing-defined material; ribbon.

Custom BC ribbon for back contact and IBC solar cell module designs requiring precise dimensions and controlled soldering behavior.

BC/IBC rear-contact example with two busbars and alternating insulation pads.
BC/IBC rear-contact example with two busbars and alternating insulation pads. View full-size illustration
On this page

Construction and specification

Scroll horizontally to read all columns.

ItemSpecification
Material constructionConductor construction and solder coating specified for the ribbon position and cell process
Product formRibbon
Surface coatingTin, low-temperature solder, black or reflective coating
Supply formatSpool, traverse wound spool or cut-to-length

Locate the connection on the back-contact layout

BC describes a back-contact configuration. The rear pad map and interconnection position determine the required conductor route and joining surfaces.

Compare conductor section and coating against the actual rear-contact layout. Inspect joint continuity, alignment and module results using the production joining and lamination sequence.

PV technology and line-trial guide

Specification design factors

Drawing-defined specification

Geometry and performance

  • Width, thickness and edge geometry define a narrow flat conductor.
  • Metal layers and solder or insulation coatings perform different functions.
  • Spool format, winding tension and joining behavior connect the material to the assembly process.

Material and form references

PV ribbon specifications separate the metallic conductor section from the solder coating. Cell layout, wire positioning, joining and module tests describe the intended interconnection.

Standards and product forms

Product questions

What is BC ribbon?

BC ribbon is a solar module interconnection material used to collect and transfer current between solar cells or cell strings. Raytron supplies custom ribbon dimensions, coating systems and packaging formats for different PV module technologies.

How do I choose BC ribbon?

Start with the cell technology and soldering temperature. Then check coating type, shading loss, yield strength, module reliability requirements and compatibility with the automated process.

Which drawing details are needed for BC Ribbon for Back Contact Solar Cells?

Width, thickness and tolerances. Edge condition, burr, surface and roll dimensions. Metal grade and temper. Coating alloy and thickness, soldering conditions, cell layout and spool format. Quantity, spool or coil format, packaging and delivery destination.

How does a flat section behave in bending and winding?

Width, thickness and corner geometry define the conductor envelope. Bending about the long and short edges produces different strains and springback. Bare metal and insulated finished dimensions occupy different portions of the available winding space.

Related products

Prepare your inquiry

  • Width, thickness and tolerances
  • Edge condition, burr, surface and roll dimensions
  • Metal grade and temper
  • Coating alloy and thickness, soldering conditions, cell layout and spool format
  • Quantity, spool or coil format, packaging and delivery destination
Send Your BC Cell Layout
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp