Skip to main content
Send an Inquiry 中文

Engineering application guide

Solar Welding Ribbon

The cell layout and stringing process determine the PV ribbon you need. The ribbon connects cell metallization; match its base construction, coating and geometry to the intended module.

Discuss the assembly requirements
On this page

Cell contact and soldered joint

  1. 1Cell metallization
  2. 2Solder coating and joint
  3. 3Ribbon conductor

The coating joins the conductor to the cell contact; the base conductor carries current through the string. The cell pad and joining process determine the trial.

Illustration of the overlap between a solar-cell pad and ribbon surface.
The overlap between a solar-cell pad and ribbon surface. View full-size illustration

Record the stringer setup, ribbon route, wetting and peel-test geometry together. The complete module assessment follows the actual cell, ribbon and process combination.

Related conductor products

Design and testing

Cell and ribbon
Specify cell technology/metallization, ribbon geometry, coating and mechanical condition.
Joining window
Record stringer setup, heating, pressure/cooling and the agreed peel test.
Module validation
Define resistance, EL inspection and module-level reliability tests for the exact bill of materials.

Application design factors

Cell-to-ribbon joining depends on metallization, coating, heat input and the stringing process.

Application design record — open worksheet

Record your project requirements and observations, then download or include them in an inquiry.

ItemInformation / unitsYour input
Cell/process identityCell technology/metallization, contact geometry, ribbon and cell lots, stringer model
Joining windowSolder alloy/coating thickness, equipment temperature/time/pressure and feeding tension as separate fields
Trial recordWetting/peel, EL cell-damage and resistance records; sample conditions, methods and acceptance owner
Other formats and preview
Save or restore a draft

Drafts stay in this browser. Clear inputs also removes the saved draft.

Worksheet version: RT-RFQ-WORKSHEET-1.

How is ribbon qualified for a cell and module process?

Match the ribbon construction and coating to the cell metallization and stringing conditions. Evaluate joint quality, resistance, EL inspection and the module reliability tests required by the selected bill of materials.

Discuss the assembly requirements
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp