Engineering application guide
Battery Tab
Battery-tab joints must match the cell terminal, metal stack and joining process. The tab carries current into the interconnect assembly; check joint resistance and strength in the cell and pack design.
Discuss the assembly requirementsOn this page
Cell terminal to module connection
- 1Cell terminal
- 2Tab or formed link
- 3Module connection
Raytron material strip is the input to the tab or link. Stamping, forming, cell assembly and the completed battery are separate stages.
Distinguish cell-internal collector foil from the external tab. Identify the layer touching the terminal, the weld region and exposed cut edges.

Related conductor products
Design and testing
- Layer construction
- Identify each metal, layer sequence and thickness; define the ratio basis.
- Joint geometry
- Specify tab thickness, weld area, terminal material and assembly restraint.
- Acceptance
- Agree joint resistance, pull/shear method and limits; include thermal cycling and exposure appropriate to the pack.
Application design factors
Battery-tab performance connects the mating metals, joint geometry and joining process to the required electrical and mechanical duty.
Application design record — open worksheet
Record your project requirements and observations, then download or include them in an inquiry.
| Item | Information / units | Your input |
|---|---|---|
| Assembly identity | Cell/tab position, drawing and revision; mating materials and coatings | |
| Sample locations | Weld number, weld dimensions, section locations and specimen/lot IDs | |
| Process and observations | Joining method/tool, process settings, resistance and mechanical test methods; record fracture location and observed failure mode | |
| Decision record | Requirement source, measured result and unit, sample count, responsible owner and open deviations |
Other formats and preview
Save or restore a draft
Drafts stay in this browser. Clear inputs also removes the saved draft.
Worksheet version: RT-RFQ-WORKSHEET-1.
What determines battery-tab weld quality?
Material stack, surface condition, terminal design and process window determine joint quality. Compare trial joints using resistance, pull or shear results, defined defect criteria and traceable cell/tab batches.