Compare Conductor Materials
Identify the grade, layer construction and comparison basis before comparing resistance, mass, strength and joining behavior.
On this page
Identify the construction
Scroll horizontally to read all columns. Keep the conditions and units with each value.
| Material | Structure to record | Surface and connection questions |
|---|---|---|
| Copper | Grade and condition | Bare or coated surface, termination and exposure |
| CCA | Aluminum core and copper cladding | Copper fraction basis, layer coverage and exposed ends |
| CCS | Steel core and copper cladding | Strength, electrical duty, copper layer and cut-end exposure |
| NCC | Copper core and nickel cladding | Nickel layer, formed/welded areas and chemical exposure |
| SCC or silver-plated copper | Confirm cladding or plating process and copper substrate | Silver layer continuity, contact or RF duty and exposed copper |
Use a common comparison basis
Scroll horizontally to read all columns. Keep the conditions and units with each value.
| Quantity | Conditions to record |
|---|---|
| Conductivity/resistivity | Grade, construction, condition, temperature and method |
| Finished resistance | Length, actual metal section, temperature and joints/lay |
| Mass | Density source, layer proportions, actual section and length |
| Mechanical behavior | Specimen, material condition, load direction and method |
| Thermal/assembly result | Current, cooling, insulation, joints and operating cycle |
| Cost | Accepted output, quantity, dated metal prices, processing, scrap and qualification |
Equal section, equal resistance and equal winding space are different comparisons. Select the basis required by the design, then compare sample or lot results under the same conditions.