CCS and Copper for Grounding Conductors
Compare the required fault duty, conductor resistance, installation load and exposure conditions. For CCS, include the steel core, copper layer and connection design; for copper, define the grade and conductor construction. Use the project requirements to compare complete grounding paths.
Locate the conductor and joints in the grounding system
Separate installation load, fault-current duty, mechanical strength and environmental exposure. The conductor, its connection and the earth electrode are different parts of the system.

State soil or site conditions, cut-edge protection and joining method. Select relevant resistance, mechanical and corrosion assessments without converting a laboratory exposure duration into service life.
Grounding roles and validationEngineering comparison
Scroll horizontally to view all columns.
| Decision | Copper Clad Steel (CCS) | Pure Copper | Comparison conditions |
|---|---|---|---|
| Construction | Steel core with copper cladding | Copper grade through the conductor section | Specify wire or strand construction and condition. |
| Electrical duty | Resistance and fault response depend on grade, section and complete construction | Resistance and fault response depend on grade, section and complete construction | Use the same fault current/duration and grounding design. |
| Mechanical and corrosion | Core, copper coverage, cut ends and joints affect installed behavior | Copper section, joints and exposure affect installed behavior | Specify installation loads, medium and test basis; no universal service life is assumed. |
| Connection | Hardware and process must fit CCS construction | Hardware and process must fit copper construction | Check the installed connection and project-permitted materials. |
CCS and Copper for Grounding Conductors: comparison record — open worksheet
Record your project requirements and observations, then download or include them in an inquiry.
| Item | Information / units | Your input |
|---|---|---|
| Comparison basis | Choose a common basis; no automatic equivalence is inferred | |
| Baseline and candidate | Materials, construction, form and drawing revisions | |
| Construction | Steel core with copper cladding | Copper grade through the conductor section · Specify wire or strand construction and condition. | |
| Electrical duty | Resistance and fault response depend on grade, section and complete construction | Resistance and fault response depend on grade, section and complete construction · Use the same fault current/duration and grounding design. | |
| Mechanical and corrosion | Core, copper coverage, cut ends and joints affect installed behavior | Copper section, joints and exposure affect installed behavior · Specify installation loads, medium and test basis; no universal service life is assumed. | |
| Connection | Hardware and process must fit CCS construction | Hardware and process must fit copper construction · Check the installed connection and project-permitted materials. | |
| Methods, conditions and evidence | Units, test conditions, result source and reviewer |
Other formats and preview
Save or restore a draft
Drafts stay in this browser. Clear inputs also removes the saved draft.
Worksheet version: RT-RFQ-WORKSHEET-1.
Products and specifications
Include the drawing, intended application and acceptance criteria when requesting a comparison.
Send grounding conductor requirements