CCA and CCS: Choose by Electrical and Mechanical Duty
Start with the required resistance, weight, strength and service conditions, then compare the aluminum-core and steel-core constructions against those requirements.
Choose the core around the installed duty
An aluminum core and a steel core create different mass, electrical and mechanical tradeoffs beneath a copper surface. Establish whether the primary task is resistance/mass or mechanical load.


Compare at the same geometry and, where relevant, at equal resistance. Then select the actual wire or strand construction and the load, connection and environment tests for its role.
Cable conductor dutiesEngineering comparison
Scroll horizontally to view all columns.
| Decision | Copper Clad Aluminum (CCA) | Copper Clad Steel (CCS) | Comparison conditions |
|---|---|---|---|
| Core and surface | Aluminum core with copper cladding | Steel core with copper cladding | A shared copper surface does not make the cores interchangeable. |
| Design priority | Compare mass, resistance and available section | Compare tensile/mechanical duty, resistance and section | Set the application duty first. |
| Joining and exposure | Check layer continuity, cut edges and aluminum-core connection behavior | Check layer continuity, cut edges and steel-core connection behavior | Use the actual construction, terminal and environment. |
CCA and CCS: Choose by Electrical and Mechanical Duty: comparison record — open worksheet
Record your project requirements and observations, then download or include them in an inquiry.
| Item | Information / units | Your input |
|---|---|---|
| Comparison basis | Choose a common basis; no automatic equivalence is inferred | |
| Baseline and candidate | Materials, construction, form and drawing revisions | |
| Core and surface | Aluminum core with copper cladding | Steel core with copper cladding · A shared copper surface does not make the cores interchangeable. | |
| Design priority | Compare mass, resistance and available section | Compare tensile/mechanical duty, resistance and section · Set the application duty first. | |
| Joining and exposure | Check layer continuity, cut edges and aluminum-core connection behavior | Check layer continuity, cut edges and steel-core connection behavior · Use the actual construction, terminal and environment. | |
| Methods, conditions and evidence | Units, test conditions, result source and reviewer |
Other formats and preview
Save or restore a draft
Drafts stay in this browser. Clear inputs also removes the saved draft.
Worksheet version: RT-RFQ-WORKSHEET-1.
Products and specifications
Include the drawing, intended application and acceptance criteria when requesting a comparison.
Compare a CCA and CCS specification