Skip to main content
Send an Inquiry 中文

Web checklist

Composite PV Ribbon Trial Checklist

Prepare the cell layout, conductor geometry, coating and stringing conditions, then define the measurements needed to compare the sample with the current ribbon.

Start with your drawing or these five inputs

Send the current drawing with its revision, or outline the material, geometry and application below. The complete specification checklist remains available for the next technical review.

Cell and baseline
Cell layout, stringer model and the copper ribbon used for comparison
Conductor geometry
Round: bare/finished diameter; flat: width, thickness and coating allowance
Layer construction
Core/outer metals, copper ratio and mass or volume basis
Coating and process
Coating alloy and thickness, soldering conditions and spool handling
Quantity and destination
Sample and production quantities, delivery country and required documents
Send the drawing or initial brief
Cell contactsCell interconnectString busbarModule connection
Functional positions only. Shape, joining area and connection hierarchy follow the actual assembly drawing.
Complete specification criteria
SpecificationSelection criteria
Cell and baselineCell layout, stringer model and the copper ribbon used for comparison
Conductor geometryRound: bare/finished diameter; flat: width, thickness and coating allowance
Layer constructionCore/outer metals, copper ratio and mass or volume basis
Coating and processCoating alloy and thickness, soldering conditions and spool handling
Trial recordBaseline copper / proposed composite / test conditions / result for resistance, joint strength and module checks
PackagingSpool, winding direction, tension, camber and splice requirements
Quantity and destinationSample and production quantities, delivery country and required documents
Sample planningLaboratory sample, process trial and production quantities; acceptance criteria, schedule and delivery destination.
Specification and inspectionSpecification revision, inspection records and agreed deviations.
Delivery and lot recordSpool/coil interface, core/OD/net weight, continuous length, joints/splices and marking, package/lot identity and required shipping records.
Composite PV Ribbon Trial Checklist: project worksheet — open worksheet

Record your project requirements and observations, then download or include them in an inquiry.

ItemInformation / unitsYour input
Cell and baselineCell layout, stringer model and the copper ribbon used for comparison
Conductor geometryRound: bare/finished diameter; flat: width, thickness and coating allowance
Layer constructionCore/outer metals, copper ratio and mass or volume basis
Coating and processCoating alloy and thickness, soldering conditions and spool handling
Trial recordBaseline copper / proposed composite / test conditions / result for resistance, joint strength and module checks
PackagingSpool, winding direction, tension, camber and splice requirements
Quantity and destinationSample and production quantities, delivery country and required documents
Sample planningLaboratory sample, process trial and production quantities; acceptance criteria, schedule and delivery destination.
Specification and inspectionSpecification revision, inspection records and agreed deviations.
Delivery and lot recordSpool/coil interface, core/OD/net weight, continuous length, joints/splices and marking, package/lot identity and required shipping records.
Other formats and preview
Save or restore a draft

Drafts stay in this browser. Clear inputs also removes the saved draft.

Worksheet version: RT-RFQ-WORKSHEET-1.

Product and test information

Prepare a composite-ribbon trial
RFQ Request Quote Discuss your specification WhatsApp
Request Quote WhatsApp