Copper Strip Specification Checklist
Specify the copper grade, temper, finished dimensions and edge requirements. Add plating, coil format and inspection criteria so the strip can be reviewed against your stamping, forming or joining process.
On this page
Specify the delivered strip and finished-part checks
| Requirement | Information to record |
|---|---|
| Copper and condition | Grade, temper, conductivity/resistance and required tensile/forming properties |
| Dimensions | Thickness and width with tolerances; flatness, camber and measurement method |
| Edges | Burr height and direction, slit or rounded edge profile, inspection method |
| Surface or plating | Bare surface acceptance or plating composition, each-face thickness, adhesion and solderability |
| Part processing | Stamping, bend direction/radius, joining, springback and contact requirements |
| Coil and traceability | ID/OD, coil mass, winding/interleaving, protection, labels and batch records |
Record the trial and order basis
Keep the drawing revision, sample identifiers, method, test conditions, acceptance limits and measured results together. Resolve open fields with the specification owner before comparing offers or releasing a changed construction.