Silver Clad Copper Conductors
Silver-Clad Copper Strip
View specificationsDiscuss your design
Silver-clad copper strip combines a copper core with a silver contact surface for custom formed electrical parts. Temper, strip geometry and surface coverage connect the material to the contact design.
On this page
Construction and specification
Scroll horizontally to read all columns.
| Item | Specification |
|---|---|
| Material construction | Copper core with a silver surface for custom conductor designs |
| Product form | Strip |
| Target use | High-end contact, high-frequency and premium electronic connection applications |
Explore the related product details for this material and product form.
Specification design factors
Engineering inquiry
Geometry and performance
- Thickness, width and temper govern forming and stamping behavior.
- Edge profile, burr direction and rolling direction affect the finished part.
- Surface and joining conditions determine electrical contact at the connection.
Formed contacts
Contact force and cycling act on the finished silver surface. Bend geometry, edge condition and rolling direction affect the formed part; the joining method connects it to the assembly.
Material and form references
Rolled strip, foil and flat wire are defined by material, temper, section and finished-part requirements. Their geometry and test methods differ from those of round wire.
Standards and product formsProduct questions
What affects strip forming and coil handling?
Thickness, width, temper and rolling direction govern forming response. Edge profile and burr direction affect the finished part. Camber describes lateral curvature; flatness describes departure from a plane, so the two address different processing effects.
What defines a silver contact surface?
The silver material, covered faces, layer thickness or proportion basis and surface condition describe the contact. Contact force, joining and the intended electrical duty belong to the part or assembly specification.
How are width and thickness related to the finished part?
The drawing pairs width and thickness and identifies corners, edge condition and temper. Separate width and thickness limits do not establish every combination. A coating or insulation build is recorded separately from the bare metal section.
Related products
Prepare your inquiry
- Width, thickness and tolerances
- Edge condition, burr, surface and roll dimensions
- Core and outer-layer metals, each layer or ratio, and mass or volume basis
- Surface finish or coating, joining method and inspection requirements
- Quantity, spool or coil format, packaging and delivery destination